Owens Corning FOAMULAR Rigid Insulation
FOAMULAR® C-200, FOAMULAR® C-300 and FOAMULAR® CodeBord® extruded polystyrene rigid insulations are manufactured using Owens Corning patented HYDROVAC® technology. Owens Corning uses blowing agents that meet or surpass government environmental requirements.
The thermal resistance (rsi 0.87/25 mm; R-5/ in.), compressive strength (140 kPa; 20 psi) and hydrophobic properties (0.7% water absorption) of C-200 and Codeboard make them an excellent insulation choice for above grade exterior wall and interior of foundation wall applications.
The thermal resistance (rsi 0.87/25 mm; R-5/ in.), compressive strength (210 kPa; 30 psi) and hydrophobic properties (0.7% water absorption) of C-200 make it an excellent choice for interior, exterior, above-grade and below-grade applications:
- below grade on the exterior side of foundation walls
- under concrete slabs where the applied loads do not exceed 30 PSI
Technical Information:
OC C-200, Codeboard Data Sheet OC C-300 Data Sheet OC Foamular Extruded Polystyrene MSDS